Industrial Market

This LED linear light has a sleek aluminum profile and can be installed suspended or ceiling mounted. The uniform light distribution prevents individual light spots from being seen. This architectural fixture is suitable for hotels, conference rooms, offices, and hospitals.

This flood light has a wide range of luminous intensity, making it suitable for a variety of applications. It features a cast aluminum housing with a watertight driver compartment sealed by a gasket.

Shoebox lights are ideal for illuminating roads, industrial areas, sidewalks, parking lots, or other large areas. These LED fixtures replace old HID pole lights, with this series being slimmer than older alternatives.

The US Luminaire semi cut-off wall wall pack series has been designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight and extremely durable.

This slim wall pack has an adjustable tilt. It can be a full cutoff wall pack with only down light, or it can be angled to direct the light where needed. Suitable for security and illuminating walkways and entrances.

These commercial cans replace incandescent, CFL, or HID fixtures with a wide range of aperture sizes. The simple installation allows the fixture to be installed from below the ceiling without removing the existing fixture.

The volumetric design of this center basket troffer provides a uniform light distribution. As a retrofit instead of a full fixture, this product easily installs to replace an old fixture without needing to disassemble or remove the existing housing.

This linear high bay features a modular design. 2-6 modules can be assembled into a single fixture to provide a wide range of luminous intensity.

Note: This product is being discontinued and replaced with USL-HB31D. Limited stock of USL-HB21D remains in the warehouse. Contact us for availability.

The US Luminaire compact high bay series is designed with a compact lamp body with smooth lines, creating an attractive appearance. The die-cast aluminum housing includes a professional cooling channel for improved cooling performance. Additionally, the luminaire utilizes toughened glass to improve impact resistance. This product is designed to handle indoor and outdoor applications with an IP65 rating. Ideally suitable for large workshops, gyms, stations, warehouses and covered parking lots, this fixture replaces traditional HID high bay lighting.

Suitable for area lighting, garage lighting, warehouse lighting, or anywhere with high bays, this fixture features an Edison socket for simple retrofitting without needing to replace the entire fixture.

This linear fixture has a quick-open feature to allow easy access to the driver. Multiple fixtures can be connected together. It is available with side reflectors. Select models have a switch to determine CCT (3500K/4000K/5000K).

This fixture is water-proof, dust-proof, bug-proof, and pressure-proof. Available as a linkable model, up to 600 W can be connected in series. It is suitable for humid environments, making it ideal in underground parking lots, metro stations, airports, harbors, factories, outdoor playgrounds, indoor stadiums, supermarkets, shopping malls, etc.

US Luminaire has a variety of products to illuminate sign boxes, whether it is retrofitting an old sign or creating a new one. Luma rail comes in lightweight easy to install rolls that feature a uniform matrix of LEDs. Luma Array has a modular design, allowing for flexibility in length. Luma Stick is designed to replace fluorescent tubes.

This LED linear light has a sleek profile and can be installed suspended or wall-mounted. The uniform light distribution prevents individual light spots from being seen. This architectural fixture is suitable for hotels, conference rooms, offices, and hospitals.

This flood light features a sleek, modern aesthetic. Many mounting options are available. Select models are available in RGB and RGBW.

US Luminaire’s second generation classic wall pack has improved
efficacy and reduced weight. It is suitable for mounting to J-box or
surface mounting.

The US Luminaire’s full cut-off wall pack was designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight while being extremely durable. Ideal applications include building exteriors, entryways and walkways, parking lots and security lighting.

This wall pack features a rotatable design to direct the light. The higher power options have two segments which are independently movable to create the perfect combination of light output both down and out.

The innovative separable design of junction box and housing makes it more flexible, with 75 degree beam angle, the 4, 6, 8, or 10 inch split commercial down light can fulfill a wide range of lighting needs. Easy-fit installation comes from adjustable spring-action housing clips. It is designed and engineered for recessed applications, which is suitable for commercial and public places and elegantly decorates the ambiance, such as shopping mall, hospital, airport, hotel lobby, etc.

This high bay is composed of 3-7 modular segments separated by hinges. This allows the lighting surface of the fixture to be adjusted by flexing the fixture either concave or convex.

This simple high bay has basic features to reduce complexity. The rectangular shape is a simple replacement for traditional fluorescent high bays.

This round high bay replaces traditional HID high bay fixtures. The optional microwave sensor is integrated in the fixture to eliminate wiring, reducing installation time.

This low bay fixture comes with 5-foot cable attached. It features an integrated heat sink for thermal management. Suitable for locations such as parking ramps, workshops, warehouses, or public transportation platforms.

This linear strip light features a quick-disconnect to simply installation. It can be installed recessed, surface mount, or suspended.

These emergency exit lights are available as an exit sign, “frog eye” lights, or a combination. These mimic the aesthetic of traditional emergency exit signage, but are illuminated with LED and are available with green or red text.

US Luminaire’s Everett series LED pendants are sure to impress. Utilizing an aluminum frame, 0.3” solid acrylic lens and both down light and up light with a 360-degree spread, these provide a sleek option for architectural design. The Everett series is designed to suspend from the ceiling and multiple fixtures can be interconnected as a long linear fixture. The Everett series is ideal for offices, reception areas, boardrooms, and anywhere else elegance is desired. Standard colors are silver and white. Additional colors are black and bronze.

This flood light has a spike to place it in the ground. It is available in RGB and single color. The fixture has a light shield to direct light and prevent stray light.

The US Luminaire classic wall pack series has been designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight and extremely durable.

This full-cutoff wall pack is ideal for use in perimeter and security lighting, walkways, and entrances while preventing unwanted light from going elsewhere. The fixture is suitable for applications requiring 3G testing prescribed by ANSI C136.31.
Select models are dimmable. Please see specification table for details.

This omni-directional corn bulb features an isolated driver and integrated heat sink for thermal management. The bulb has flame retardant materials and built-in overheat protection in the power supply. If either the lamp body or the driver reaches the thermal
cutoff, power is reduced to 70%. If both are triggered, power output is 50%. When it returns to normal, output returns to 100%.

This troffer is suitable for both new construction and retrofit applications. It can be used in applications such as office spaces, retail stores, education, government, healthcare, and hospitality.

This linear high bay is available in 2-foot and 4-foot lengths. Electronics and optics are separated to lower fixture temperatures, extending the lifespan.

This highbay features a dial to switch the beam angle between 60 90 and 110 degrees. There is an option to mount the fixture upside down to create indirect uplight (not compatible with motion sensor).

This light-weight, compact high bay fixture is ideally suited for large area applications such as workshops, warehouses, parking lots, sports venues and dock areas. Its unique patented sunflower heat sink allows for advanced thermal dissipation. And its rugged die-cast aluminum housing ensures its durability.

This second-generation linear strip fixture is suitable for a wide range of applications such as storage and utility areas, cove lighting, display cases, and task or general lighting. It can be surface mounted, pendant mounted, or attached to t-bars in a grid ceiling.

The US Luminaire sleek linear stairwell fixture series offers emergency backup and motion sensing options. Multiple mounting options include ceiling, wall, and chain or cable wire suspension. While these fixtures are ideal for stairwells, they also work well in parking garages, warehouses, and school and supermarket corridors.

Mini-modules are ideal for applications such as channel letters and other signage. They can be used to replace fluorescent or neon lighting to create standard front-lit signs, back-lit, or a combination of lighting. Available in white or color, these mini-modules can be used to make a truly custom solution.